README

In this sample page, 'PanoSterec.js' is used as the AudioWorkletProcessor module. Follow the instructions below.

• Select the recording device(See [footnote*]) from the dropdown list and press 'Set'
• 'Record' will be enabled
• Press 'Record' to start recording
• When the recording starts, 'Stop' will appear and be enabled
• Listen to the sound through the stereo headphones
• Control panning by '<-' and '->' buttons
• Press 'Stop' to quit recording
• The maximum recording time is 300 s
• When the recording is done, 'Playback' will be enabled
• You can save (download) data to a stereo WAV file

[footnote*] To use either 'ZOOM iQ6' or 'TASCAM DR-22WL' as the recording device, you have to get the analog audio signal from the phone-out jack of the device and digitize it with a USB audio interface connected to your computer. To get the analog audio signal from the phone-out jack, the device has to be in the recording standby mode.
If you are using 'ZOOM H6' as the recording device, it has to be connected to your PC as the audio interface.